| Bit | HEX code | Description |
|---|
| 0 | 00000001 | Signal quality error
|
| 1 | 00000002 | Signal recording error
|
| 2 | 00000004 | Signal values null or void
|
| 3 | 00000008 | Signal processing error
|
| 4 | 00000010 | Create new NetCDF file
|
| 5 | 00000020 | Write / add to NetCDF error
|
| 6 | 00000040 | RS485: telegram can not be generated and transmitted
|
| 7 | 00000080 | Mount SD card failed
|
| 8 | 00000100 | Detector HV voltage out of range
|
| 9 | 00000200 | Inner housing temperature out of range
|
| 10 | 00000400 | Laser optical unit temperature error
|
| 11 | 00000800 | Laser trigger not detected
|
| 12 | 00001000 | Laser driver board temperature
|
| 13 | 00002000 | Laser interlock
|
| 14 | 00004000 | Laser head temperature
|
| 15 | 00008000 | Replace Laser - Ageing
|
| 16 | 00010000 | Signal quality information weak signal/ noise
|
| 17 | 00020000 | Windows contaminated
|
| 18 | 00040000 | Signal processing warning
|
| 19 | 00080000 | not used
|
| 20 | 00100000 | File system warning, fsck repaired bad sectors
|
| 21 | 00200000 | RS485: baud rate/ transfer mode reset
|
| 22 | 00400000 | AFD
|
| 23 | 00800000 | not used
|
| 24 | 01000000 | Laser optical unit temperature warning
|
| 25 | 02000000 | External temperature warning
|
| 26 | 04000000 | Detector temperature out of range
|
| 27 | 08000000 | General laser warning
|
| 28 | 10000000 | not used
|
| 29 | 20000000 | Power save mode on
|
| 30 | 40000000 | Standby mode on
|